• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

Door Handle Replacement

Door handles seem like something minor however, if you don't like the appearance of the upvc window locking handles or are finding them difficult to use, it's worth replacing them. Installing a new door handle is easy if you have patience.

Most modern door handles have cover plates that conceal the screws for an attractive appearance. If the new handle doesn't have screws already attached, you will have to attach them separately.

Remove the Old Handle

Door handles are not only important for their aesthetic value to your home, but they're essential for security as they allow you to lock and unlock your door. But, over time the door handle could lose its grip, appear loose or start to look old and worn out. This is an indication that it's the time to replace your door handle for patio door.

If your door handle is becoming difficult to use, it could be time to replace it. This is a problem since it means that you can no longer lock or unlock your door, which could pose an security risk to you and your family.

Another reason to replace your door handle is when it's damaged or broken. A broken door handle is dangerous, especially for elderly or children members who may struggle to open it. They may get trapped. It's easy to replace a broken handle on the door.

Modern door handles are typically standard sizes and will fit any door. If you're not sure whether your new door handle will fit, try taking out the old one and measuring the holes in its housing. This will let you buy the right size door handle.

It is the easiest way to take off the old door handle by unscrewing it from the door. This is usually done using a screw driver. However, some door handles have the cover plate which hides the screws that mount them, so you'll have to cut off this to access the screws underneath. After you've removed the old handle, make note of the way the spindle is attached to ensure you are able to make sure it is aligned when you put in the new one.

You can also remove the door handle by removing the latch mechanism. This is usually done with a screwdriver but you'll need to locate the small latch, which is located at the edge of the trim piece. After you have removed the latch, take off the handle and strike plate. Then, you can remove the latch from the door's edge.

Removal of the Strike Plate

You'll need to replace the latch plate after replacing the handle. It's the part that is the one that holds the hole in which the latch for the door is inserted when the door closes. The box that the new handles come in will have two latch plates: a rectangular one and a circular one (see the above diagram that outlines door handle parts). If you have a rectangular latch plate, swap it with a round one. This will allow the latch to be able to hook onto the strike plate, making the handle more convenient.

The first step is to remove the screw that is holding the old latch plate. The screws can be very tight and will require some force to loosen. If possible, it may be beneficial to have another person assist you with this task.

After the screws are removed, the latch plate should pull out of the door easily. If the latch plate is stuck or refuses to move, use a small file to scrape the edges. This can help loosen the plate.

Now you can prepare the new strike plate for installation. Using the wood screws that were included with your new Handles For Internal Bifold Doors, attach the latch plate to the inside of the doorjamb. Be cautious not to tighten too much the screws, as this could cause damage to the strike plate.

If you're not sure whether the latch plate is in the proper position, close and open the door to check if it latches and closes properly. If it doesn't then you'll need to adjust the strikeplate up or down, or forward or back until the door shuts correctly.

If the door is still moving or jiggles, you might have to expand your latch hole on the strike plate. This is more frequent on older doors. It could be caused by wear and tear, hinges that are too narrow, the wrong size latch, or damaged strike plate. If this is the case, follow the exact procedure to adjust the strike plate, but with an iron file instead of the hammer and chisel.

Take off the Latch

The latch is the angled metal piece that moves between the hole in the inner edge of your door. The latch moves forward when you turn the handle. It also hooks in an opening in the door frame so that the door is closed. If your door shakes when you close, a new latch may be all that is needed to fix the problem.

The screws that support the door latch are hard to spot however, you can use a screwdriver to make a small hole on the trim plate, and then pull the latch off. Once you've removed the trim plate, it should be simple to remove the latch as well as the bolts that keep the spindle and latch in place.

If the latch isn't able to be released it is suggested to use the clip of a paper or tool to release it from the handle mechanism. Insert the item into the recessed slot of the latch and gently twist it or jiggle until the that the latch and handle are beginning to break off. You may need to repeat this several times before the latch comes loose enough to allow it to be pulled out.

You should be able to slide the new latch into its slot without any issues once you have removed the old one. Make sure that the latch is positioned correctly in the slot and aligned with the screw chambers, and then use the new screws to fasten it to the strike plate and door frame.

Before installing the new handle, make sure to measure your existing backset (the distance from the center of the big hole on the front surface of the door to the edge). Also, make sure that the size of the latch on the new handle is a good match to the measurement of your existing handle.

You'll require a new cylinder for your lock if you're replacing the latch and handle or your existing one is damaged. If you're not replacing the locks however, a new latch will fit in the existing recess and work just fine with the keys you have currently. Make sure you select an entry point with rectangular cover plates that match the handles you have.

Remove the cover plate

Door handles can start to look shabby with time If you replace them with a contemporary lever on rose design it's a quick and easy DIY and decorating project that will improve the overall look of your home. You can purchase complete sets that include the appropriate escutcheons and privacy adjustor kits.

To replace an internal door handle, remove the cover plate (or rose) that covers the screws and mechanism. Find an release tab on the plate, and make use of a flathead screwdriver to pop it off the knob. It could have an opening along one side or be held in place by a pin.

Once the cover plate is off take the screw that holds the interior handle in place and set it aside. It is also necessary to take out the screws that hold the latch and the plates inside and the latch plate, which can be done by loosening them using the help of a Philips screwdriver. Remove the plates that hold the inner plate and latch from the door. Place them aside.

Not all doors have this gap. If it doesn't have a handle, you'll need to drill a hole into the door for the new handle. The procedure for this is the same procedure for opening a door with the lock, however you'll be taking extra care not to damage the door or frame.

Installing new screws for the door knob is required after the holes have been drilled. Purchase the same size as your old screws to ensure that you don't get a handle that is too loose or tight. You'll also have to install a new strike rod and latch plate that aren't part of the majority of door handle sets.

If you're in search of a reliable upvc replacement window handles set of interior door handles for bifold doors, try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory fit and has received hundreds of 5-star reviews from happy customers. It's an excellent option to replace worn or damaged interior door hardware on your Chevy.