• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

How to Programming a Subaru Key Fob at Home

Depending on how brand new your Subaru is, you might need to have your key fob programmed by an automotive locksmith. This is typically done by connecting a computer to the computer in your car.

To program your Subaru, unlock the driver's side door using the door button and then close it. You will hear a chime from the instrument panel, and the dome lights will blink.

Step 1: Locate the circuit board of your transmitter

There are many ways to program your key fob. First, you must be aware of what kind of key fob you have. This can be done by studying the key fob's shape or by listening to the car for a chime.

Once you have these details, you are able to begin the process of programming your key fob at home. You will need a flathead and a metal key for this. Open the key fob by twisting. Push the key's metal part into the case, and then let go of the battery by pressing the tabs holding it in place. Replace the battery with a new one and then put the key fob case back together.

Step 2: Unscrew the Key Fob Case

The battery should be replaced. This is a smart idea as it could revive key fobs that have stopped working any more. However, there are some situations where the buttons on the key fob may be damaged. If you notice that the buttons' contacts made of metal have been damaged, you can try soldering them back in place to get them working again.

Before you begin the process, ensure the doors of your car are shut and your ignition is off. Close the driver's door and then press the button 10 times in rapid succession. You'll then hear the instrument panel chime, and your dome light will flash. This indicates you're now ready to proceed.

Step 3: Insert the replacement key for subaru forester Fob in the ignition

Many online articles will tell you how to program your new or replacement key subaru subaru chip key replacement keyfob at home. But, the majority of them do not provide very specific instructions. A professional auto dealer or locksmith in Fort Bliss is the best option for reprogramming an electronic replacement car keys subaru key.

Sit in the driver’s seat, with all doors closed and the engine off. Use the door button to open all the doors. Open and close the door to the driver's side two more times. After that, insert and remove your key from the ignition switch (don't turn it) 10 times in 40 seconds. The system should chirp to confirm that the settings have been altered.

Step 4: Turn the ignition On.

It is crucial to understand that this method of programming a key fob only is effective if you have a working key. If not, a dealership or auto-locksmith will need to program keys for your Subaru Fort Bliss.

Once your key is programmed and you are able to start your car in around five seconds. To begin, ensure that all doors are closed and the engine is off. Next, get in the driver's seat and open all doors with the door button control. Insert the key into the ignition, turn it on to the off position (the electrical systems will come on, but the engine remains off) then turn it back to the off position ten times in rapid succession.

Step 5: Unlock Driver's Door

Subaru offers a wide range of luxury cars with key fobs which lock and unlock doors, turn on the engine, and even defrost windows. These devices can stop working.

Contact a locksmith or dealer to fix the issue. This will fix the problem and make sure that your car is safe.

To do this, you must open the driver's door and close it. Then, put the key in the ignition and move it to the first position. Then, return it to the off position. Do this ten times in one row as fast as possible. After the tenth rep, you should hear an audible sound.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

The process to replace the battery in the Subaru remote key fob is simple. The first step is to open the exterior fob casing. Utilize a flathead tool to pry the inside of the case and remove the old batteries.

After removing the battery, insert the new one and close the case. Then, you can sit in the driver's seat and unlock all doors by using the door button control. Then, put the ignition key and turn it so that the electrical systems are on, but the engine is off. Repeat this 10 times until you hear the chime coming from the instrument panel. This will put the system into programming mode.

Step 7 7. Press the Lock/Unlock button on the Passenger's Door

The annoying chirp which can be heard when you lock or unlock a replacement subaru key cost Key Fob from the outside of the vehicle is distracting for certain owners. In certain situations the chirp could be disabled by opening and closing the doors as well as a double-click of the lock button on the key fob.

Switch off the ignition and close all doors and the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. After this is done the instrument panel will emit an audible chime. The chime indicates that the door and fuel-filler lid are locked. It is possible to change the setting so that the doors lock automatically and without pressing a switch.

Step 8: Enter the 8-Digit Transmitter Number.

Note down the initial series of 8 digits and keep it in your wallet. Then, get into your driver's seat, close all of the doors, and then turn the key to the first position (towards towards). After 10 turns, the instrument panel should sound once.

Then, open the key fob case and look for the circuit board that controls the transmitter. The circuit board should be able to display one or two numbers with 8 digits. Note the first sequence of numbers, and follow the instructions in this guide to register the code in the system of your vehicle. For older models, this procedure might require a visit to the dealer.