• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. However when windows with double panes are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the distance between the door and the window is significant, you may want to use security screens that includes windows. This will give you the best of both.

2. Sagging

upvc window repairs near me is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a number of problems, including sagging. A sagging upvc window repairs window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from worsening.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll have to open the window to get to the frame. After that, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws until they stay in position.

If you aren't able to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle wearing out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to close the window and do an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is crucial to act if you get up each morning to find a smoky wall and floors that are wet. Windows that leak water do are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze it could be hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. Changing a window hinge is essentially a very simple process but it can be simpler with someone else to help hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge, this shows which way the window should open.

The issue could be caused by opening the window improperly or by a poor installation in the factory. This can often be resolved by sending us a picture via our website and we will be more than happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges, also because of wear and tear, can become misaligned, this will cause an opening to appear where the sash joins the frame. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also become misaligned, again it may be possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals. These are prone to wear or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will help to keep cold air out and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach an point at which it is more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as you can.