• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your property until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the window and the door is substantial, you may want to use a security screen that also has windows. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of problems including sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. After that, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in the right position.

If you can't reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. The first step is to close the window and perform an experiment fit. The corner joints of the sash must align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how severe the issue is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double glazed window repairs-glazed glass, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens with an ease. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier if you have someone to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused either by opening the window incorrectly or due to a poor installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your upvc window repair window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become misaligned due to wear, creating gaps where the sash meets frame. They can be repaired by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them realigned or replaced. The second is the interlock, which is on the hinge side of the window repair, can also be misaligned, and again it is possible to give them a clean but in some cases it might be necessary to get them replaced.

The next common reason for draughts are the window seals. These are prone to wear or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a type of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. If you encounter any issues with your window made of upvc, it's best to consult an expert immediately.