• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like aluminum or timber.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the new window will generally fit within the old frame very easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this case you'll need source some plastic spacers that will help the new pane to fit perfectly into the window frame.

If you're planning to attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you may think about a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, over time, they can suffer from a variety of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window to get to the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in position.

If you can't reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it can also be due to the handle mechanism wearing out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease It could be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a very simple procedure, but it is simpler when you have a person to help hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. This can be done by checking for the arrows on each hinge. This shows which way the window should open.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be happy to give you advice.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. First, the hinges due to wear and tear may become displaced, which causes gaps to develop where the sash meets the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. Second, the interlock can also become misaligned. This happens on the hinge's side and might require to be cleaned. In certain instances it might be necessary to replace them.

The next most common reason for draughts is window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them rather than repair them. If you encounter any issues with your upvc window repair window you should consult a professional immediately.