• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If windows with double glazed windows repair panes are joined by internal beading, it is difficult to remove and replace the old panes. In this situation, you will need to locate some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you are going attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your home until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap between the window and the door is significant, you may want to use an alarm system that has a window. This will give you the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. In time, they could develop a variety of issues such as sagging. A sagging uPVC windows can cause issues with light, draughts and even security. It is crucial to act immediately if you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you've relocated your hinges. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the repairing glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze, it may be the hinges that are at fault. They can be repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It is very easy to change the hinges on a Window repair, but it's easier if someone else helps you hold the frame.

Check that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of poor installation at the factory. Sending us photos through our website can often resolve the problem. We are happy to give suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It also decreases the possibility of a window sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges because of wear and tear, could become misaligned. This causes gaps to develop between the sash and the frame. If they're beyond repair a door, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it is possible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce the risk of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes filled with some kind of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to recognise that windows last for a certain period of time and there may come a point where it is more economical to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.