• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

Cat flaps allow your pet to go in and out whenever they want without needing to let them in or out. They also can help to stop your cat from urinating inside the house.

Installing a cat flap on the door panel made of upvc is much simpler than installing one in a glass door, but it requires some knowledge and the proper tools.

Measure the Door

The installation of a cat flap inside a door can be tricky but as long as you choose the right type of cat flap, take your time and follow the directions provided, it should not prove to be a problem. We will help you draw the shape and then use an jigsaw to cut out the door area. Then, we'll finish the job by attaching the flap. This will ensure the flap is in place and also protects the doors from the damage caused by rain and wind.

The first thing you need to do is determine the width of your pet in order to get a precise measurement of what size of cat flap you'll need. This will ensure that the flap is large enough to allow your pet to enter and leave the house without having to open or close the door every time, but it is also small enough to stop them from moving too far either way.

Once you have the measurements you can determine where on the door the template should be placed, typically this is done using an X, but some kits come with a drawing that shows where to drill, if yours does, then you can stick it to the door and use a pencil to draw around the door. If your door has a sill or moulding at the bottom, be sure you leave enough space between your cat and the moulding or sill.

Put on your eye protection and a dust mask and using a jigsaw, begin cutting along the line you penciled in. Don't press the blade too hard because this could cause it to cut more quickly than you want it to. If you own a square that you have cut, use it to ensure whether you're cutting in the right way and to make sure the hole is a good rectangle. Once you are satisfied with the shape, you can begin to take off the remaining door material.

Draw a Line

The cat flap lets you to let your pet inside and out without worrying about unwanted visitors or unwanted gifts. It also prevents draughts, and helps to keep your home's temperature stable. The installation of a cat flap your door may seem daunting to those who haven't tried it before. Many people will call a professional joiner or carpenter to do the work. This is a viable option, however you can do it yourself if the tools are appropriate and the directions are adhered to.

While this is much simpler with a timber door, it is still possible to do this in uPVC doors, but you must be careful not to scratch the doors as this will invalidate your warranty. The first step in the process is to measure the door, ensuring that it will fit the new cat flap. If you have an ordinary uPVC panel it should be a breeze. However when your door is made of composite or another kind of door, you might require more care.

The next step is to determine the size of your cat's belly. This is the measurement from the floor to the underside of the cat flap step's stomach, and you'll need find a place near the door where this measurement will fall within the range that your pet can comfortably go through. Once you have the information, you'll have to mark the area with a spirit-level and a pencil so you are certain that the hole will fit your cat.

Once you've marked the area, it's time to cut out the hole. You will need the jigsaw, and it is crucial to take your time in order to ensure that the cuts are clean and smooth rather than uneven and rough, as it could cause damage to your door. Wear safety glasses and a dust mask while working with the jigsaw. Inhaling sawdust can be harmful for your health. After you've completed the cutting, you'll have to smooth the edges of the hole using sandpaper so that your cat flap can be fitted easily into place.

Cut a Hole

Getting a cat flaps for french doors flap fitted to an existing door panel or double glazing sealed unit is quite difficult. You might be tempted to tackle the task yourself, but unless have experience in DIY it is recommended to hire a professional to do the task for you. A botched job could not only be unsightly but also pose an security risk. It could allow cold air in when the cat is outside and hot air out when inside.

The first thing to do is draw the position of the hole in the door using a pencil and an ax level. This will ensure that it is properly placed and runs flush with all the other components of the door. You should make sure you have an sandpaper piece on the ready to smooth any edges.

Wear any safety gear you need to work with a power tool. If you are worried about the noise of a jigsaw you can buy one that is cordless, which is quieter and more user-friendly to use.

It is best to only remove the material required to fit the flap. It is important to leave some extra material to make the wall thickness of the flap. However cutting off too much material can cause issues or even damage the door frame.

If the door is made of upvc and is made of metal, or has a frame, it may interfere with the microchip flap. In this case you'll need create an extra-large hole to ensure that the metal doesn't get in contact with the wall of the flap.

If you're installing the cat flap installers near me flap onto an upvc door or a double glazed windows with a metal frame then you'll need to speak to a professional who will supply you with a new pane of glass that already has the hole for the cat flap premade inside. It will be much cheaper to get this done rather instead of trying to install the cat flap onto an existing glass pane that hasn't been designed specifically for the purpose.

Fit the Flap

Cat flaps allow your pet to come and go whenever they want, allowing them the ability to unwind in the home whenever they want to. If you've got an uPVC door it can be difficult to install a cat flap in upvc door panel flap, especially if you don't own glass panes that can be cut to fit one. If you're able to buy and install a half-glazed replacement upvc door panels with cat flap uPVC panel then it is possible to add an animal flap onto these doors. It's not a simple matter of drilling a hole into the door. It is also necessary to perform a few steps to ensure that it is safe.

A composite, uPVC, or GRP door panel is usually composed of a thin plastic skin that is bonded to an insulating polystyrene base. The material is fairly fragile and care should be taken when cutting through it to avoid causing damage. This type of door has a template you can use to make the hole.

After you have marked out the opening in your front door, it's time to put in the cat flap. You can pick from a range of options, from simple push-button models to microchip activated ones that allow only your pet to enter. However, regardless of what kind of cat flap you select, it's important to make sure that your cat is able to use the flap without getting stuck outside in the rain.

A circular fitting is superior than a square, because circles can be cut more securely into the glass. This is because square holes leave the glass vulnerable to cracking when a drill is used on it. It's also a how much to install a cat flap safer option as you're not putting yourself at risk by drilling into toughened glass that could shatter and injure your pet or your family. This is particularly crucial if you have elderly or children living in your home who might be injured by glass fragments.