• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace and will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the old panes. In this case, you will need to find some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

If you are going to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is particularly large, you may think about a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues such as sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It's crucial to act when you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll have to open the window so that you can access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and verify the fitting. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it can also be caused by the handle mechanism wears out. Fortunately, it's easy to repair the handle of a window that is loose yourself. You'll first need to close the window and perform an experiment fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. Windows that leak water do are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer of caulk is applied. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with ease It could be hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It is essentially a simple procedure, but it is simpler if you have someone to help hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us a photo via our website will often solve the issue. We are happy to provide suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window repair near me easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again due to wear and tear could become misaligned. This will cause gaps to develop where the sash meets the frame. These can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to have them aligned or replaced. The interlock may be unbalanced. It is located on the hinge's side, and could require to be cleaned. In some instances it is possible to replace these.

These seals can wear down or become damaged over time, allowing air escape. Installing high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the risk of draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be put on top of your windowsill. They can help keep cold air out and keep your home warm and cosy!

Your windows made of Upvc window repair will continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a life span and eventually, they will reach a point where it is more economical to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is best to seek professional assistance as soon as you can.