• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. However when windows with double panes are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance, you will need to source some plastic spacers to aid the new pane in being able to fit correctly into the window frame.

If you plan to attempt to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window repair panes, so that any shards fall on the fabric and not onto the floor and could be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you may think about a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems that include sagging. A sagging window in uPVC can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll need to open the window to access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. Often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and then perform an experiment fitting. The corners of the sash need to be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, the old caulking might need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. This can be easily corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is an easy process but it can be simpler when you have a person to help hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation in the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you suggestions.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges can also be misaligned due to wear, which can cause an opening where the sash and frame meet. This can be easily fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them aligned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge's side and could require to be cleaned. In certain instances it might be necessary to replace these.

These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes which are filled with a sort of filler and can be placed on top of your windowsill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to recognize that all windows have a life span and there may come a point where it is more economical to replace them than repair them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.