• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It is discrete, does not use LED indicators or key fobs and is hidden in the wiring of your vehicle.

The user may also turn off the system temporarily using Transport Mode when renting out their vehicle. This guide will walk you through the process of installing the Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, watch key cloning and relay attacks. The system is linked directly to the ECU of your car and protected by a PIN code you select. It is not detected by thieves using diagnostic scanners or other modern methods. It isn't able to be disabled with circuit cuts.

The system is simple to use, but professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also recommend a tracking system or alarm system to complete your vehicle's security package.

To avoid an accidental deployment of airbags or short circuits The installer must first remove your battery. Once the battery is disconnected, the installer can be able to work safely. Basic hand tools can be used for precise connections. A multimeter is useful to check electrical values. Insulation tape and cable ties are also necessary for securing connections and keeping wiring tidy. The user's manual provides specific guidance specifically tailored to the Ghost Immobiliser model you have.

During the installation, it is crucial to select the right grounding location that is free of debris and paint. Installers must also ensure that the immobiliser's wires, CAN H and can L are connected to the proper ECU ports. The wires can be connected or soldered based on the model. Using a top-quality connector is recommended to ensure a sturdy and reliable connection.

Transport Mode can be turned on by the customer after the installation is complete. This allows mechanics or valet parking to use the vehicle without knowing the pin code. The customer has to press the icon for service on the dashboard five times within two seconds. Once this is done the system will confirm with 5 indication signals.

The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's an excellent option for those who regularly rents out their cars through platforms such as Turo. Immobilisers can lower insurance costs, since it decreases the likelihood of theft.

Getting Started

If you're looking for a solution that will safeguard your vehicle from theft You can't go wrong with an autowatch ghost immobiliser. The device prevents your vehicle from starting even if someone steals or copies your key. This is due to its sophisticated technology that is designed to prevent the engine from running unless the correct PIN code is entered.

The device is connected to the vehicle's bus system CAN and allows direct communication with the ECU. It makes use of buttons already on the dashboard and steering wheel to create a unique sequence only you know which makes it impossible for someone else to start your vehicle. This is the most secure security system that protects your most precious possessions and will ensure its value when you want to sell it in the future.

Installing an immobiliser from Ghost is simple however, you must follow the directions to avoid electrical issues and malfunctions in the system. First, you must locate a 12V power supply and a suitable grounding for the chassis of your car. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors and soldering techniques to ensure a solid connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to avoid short circuits in electrical power.

After the wires have been connected, you can reconnect the battery and turn on the engine to test the immobiliser's functionality. If everything is functioning properly you can place it in a secure location under the dash or somewhere else in the vehicle. Make sure to hide it well to prevent a thief from tampering with it.

The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it is a high-quality deterrent to car thieves. It is a superior defense against key cloning, hacking, and relay attacks, and cannot be disabled without knowing the code. The device is also easy to use and is able to be put into a service valet mode so that your car will not be activated when you take it in for servicing or an MOT.

Wiring

The Ghost Immobiliser is a cutting-edge security system that's designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus network and communicates with the ECU, making it virtually undetectable to your car. Ghost Immobiliser doesn't interfere with the factory settings of your car unlike other aftermarket systems that require the removal of circuit elements.

It's also undetectable to thieves using diagnostic scanning devices. This is due to the fact that it does not transmit and receive radio frequency signals, and it uses the CAN data format to communicate with your ECU. In addition, it doesn't need any modifications to your vehicle's existing key fobs.

To utilize the Ghost Immobiliser, simply switch on the ignition of your car and enter your disarm sequence (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. You can now start your vehicle and drive in a safe manner.

Once installed The Ghost Immobiliser can secure your vehicle from hacking and key cloning while preserving the value of your pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to hand your car to service or valet park.

To complete a Ghost Immobiliser installation, you'll need to identify a source of constant power (12V) and a grounding point. Ensure that these are both well-insulated and safe to touch. It is also recommended to use cable ties to tie and secure the wires, since this will decrease the chance of theft by thieves. Be sure to double-check the locations of these points to avoid committing a mistake and mark them with an adhesive or label. It's also a good idea to check all connections for signs of wear and tear. Loose connections can lead to system malfunctions, so be sure that they're firmly fixed and well-insulated. Make sure to test your Ghost Immobiliser once the installation is completed. This will ensure that the unit functions properly and that all connections and insulation are secure. Be sure to correct any issues immediately.

Testing

The Autowatch ghost immobiliser reviews Immobiliser is a cutting-edge car security system that integrates seamlessly into your car's ECU to stop unauthorised engine start. Its cutting-edge technology safeguards your car against hacking, key cloning, and other common tactics that thieves employ to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unique features, combined with its subtle design, make it a popular choice for car enthusiasts as well as security-conscious drivers.

In order to ensure that the ghost immobiliser birmingham Immobiliser is properly integrated the Ghost Immobiliser, you must to follow all steps of the installation procedure. The best place to start is to consult the wiring diagram of your vehicle, which will serve as a roadmap for locating and connecting the wires required. You'll need to determine the grounding and power sources. Once you've located them, you'll be required to mark the points to make them easy to locate during installation. It is essential to use top-quality materials and tools. Hand tools are a must with making precise connections while a multimeter can verify electrical values and ensure safety. Cable ties and insulation tape will help keep all connections tidy and neat. Also, a user's guide will provide specific instructions tailored to your Ghost model.

Before proceeding with the installation, it's important to test the system by entering the PIN code and then starting the vehicle. This step will confirm the immobiliser works as intended and stop unauthorised vehicle starts. It is recommended to complete this procedure regularly as part of your regular vehicle inspections to ensure that the system is operating properly.

Once the installation has been completed, you can begin driving your vehicle with confidence. The ghost immobiliser reviews will help keep your precious possessions secure from thieves who might steal it, ensuring that nobody can drive off with your vehicle without the correct PIN code. The Ghost can be linked to an approved Thatcham tracker, which detects attempts at theft or tampering. This allows you to locate your car if it's stolen.

The ghost immobiliser review can be utilized on a wide range of vehicles and is compatible with the majority of major manufacturers. If you are interested in securing your car with this innovative device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Installer who is registered which guarantees that we follow strict guidelines and procedures when installing our products. This assures customers, insurance companies and law enforcement agencies that installations are done in a safe and correct manner.