• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you plan to try to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will prevent drafts and water from entering your home until a professional is able to repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap between the window and the door is significant, you may need to consider a security screen that also has a window. This will give you the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. As time passes, they may develop a number of problems such as sliding. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need open the window so that you can access the frame. Then, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and check for fitting. If you're satisfied with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to shut the window and do an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the issue the old caulking may require removal before a new layer of caulk can be put on. When it is time to uPVC repair window, you must avoid over-caulking. This will only make your window more difficult to clean and reduce its energy efficiency.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to replace the repairing window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass repair seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze, it may be hinges that are at fault. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It's very simple to replace a hinge on a window, but it's easier if someone helps you hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should open.

The problem can be caused by opening the window improperly or by a poor installation in the factory. This can often be resolved by sending us a photo via our website and we will be pleased to offer you advice.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges may also become unbalanced due to wear, creating a gap where the sash meets frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock, which is located on the hinge side of the window and can be misaligned. Again, it is possible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows will eventually get worn out and it may be cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.